[Service]

The following settings can be used in this section:

Host

This is the network interface to which the service binds to, remove this to bind to the default interface (usually the case).

Type:text

Example:Host=127.0.0.1

Port

This is the port used by the administration interface to communicate with the service

Type:number

Range1025 - 65535

Default:23002

Example:Port=23002

Network

Type:flags

Default:IP4

Example:Network=IP4

AllowedIPList

This is the list of allowed IP4 or IPv6 addresses that can connect to your server for administration. You can use CIDR notation, wildcards and ranges (e.g. 192.168.0.0/16, 192.*.*.*, 192.10-50.*.*, 0:0:0:0:0:0:0:*) or leave blank for any IP. By setting this connections are restricted to ONLY those that match an entry in this list

Type:text

Default:127.*.*.*,::1,0.0.0.0

Example:AllowedIPList=127.0.0.1,192.168.0.0/16,192.*.*.*,*.*.*.*,*:*:*:*:*:*:*:*,::1

See Also:DisallowedIPList

DisallowedIPList

This is the list of disallowed IP addresses that cannot connect to your server for administration. You can use wildcards and ranges (e.g. 192.168.0.0/16, 192.*.*.*, 192.10-50.*.*) or leave blank for no restrictions. By setting this connections from any IP that matches an entry in this list are prevented. Note that if an IP matches an entry in the allowed IP address it is allowed regardless of matching a disallowed IP

Type:text

Default:*.*.*.*,*:*:*:*:*:*:*:*

Example:DisallowedIPList=62.235.23.32,192.168.0.0/16

See Also:AllowedIPList

Language

Type:select

Options:English, Norwegian

Default:English

Example:Language=English

ProcessThread

Type:bool

Options:On/Off, True/False, Yes/No, 1/0

Default:off

Example:ProcessThread=off

CPUAffinity

Type:number

Range0 - 32

Default:0

Example:CPUAffinity=0

CPUID

Type:number

Range0 - 32

Default:0

Example:CPUID=0

EnvCheck

Type:bool

Options:On/Off, True/False, Yes/No, 1/0

Default:On

Example:EnvCheck=On

EnvCheckCycle

Type:number

Range0 - 10000 Minutes

Default:60 Minutes

Example:EnvCheckCycle=60

EnvCheckDisk

Type:number

Default:Dir+Create+Move+Copy+Delete

Example:EnvCheckDisk=Dir+Create

EnvCheckMem

Type:number

Default:Alloc

Example:EnvCheckMem=Alloc

EnvCheckNet

Type:number

Default:Request

Example:EnvCheckNet=Request

ServerEnablex

Enable this server for configuration

ServerNamex

Friendly name for this server

Example:ServerName%d=MyBackupServer

ServerHostx

The hostname or IP address of the server

Example:ServerHost%d=192.168.1.4

ServerDescx

Description of this server

Example:ServerDesc%d=This is the secondary MX server in case of failover

ServerPortx

This is the port used by the administration interface to communicate with the service

Default:23002

Example:ServerPort%d=23002

SecondaryServicesSettingSkip

The configuration settings to skip when pushing configuration to secondary servers

Default:Archiver:*,Server:Host,Webui:Host,WebAdmin:Host,POP3 Server:Host,IMAP Server:Host,

Example:SecondaryServicesSettingSkip=Archiver:*,Server:Host,Webui:Host,WebAdmin:Host,POP3 Server:Host,IMAP Server:Host,